Make sure the largest hoop size has been chosen in the Settings menu before proceeding.
Step 1. Go to embroidery mode. Create a name tag with a border of your choice and add the text inside the border. Once you are satisfied with your design, press the purple
|Step 1. You've created the design!|
Step 2: Technically, you are now ready to begin embroidering. (See how the options at the bottom of the screen are different than the previous picture?) However, the design needs to be edited for multiple copies so press the
button in the upper right area of the screen.
|Step 2: Press |
Step 4: Use your arrow keys and reposition the embroidery design so it is in the upper, left-hand corner of the frame on the screen. Leave a little space between the design and the edges of the frame on the screen. You do NOT want the design butted up against the top and left edge.
Step 7: Now press the
key in the upper, right-hand corner of the screen as shown below.
Step 8: Select the 9-Tile icon on the right side of the screen as shown below.
Step 10: Press the horizontal tile icon as shown in the pic below.
Step 11: Press the horizontal tile icon with the + as shown below. Be careful to select the icon with the + sign on the right-hand side of the icon. Pay close attention to the icon that is selected by my stylus.
Step 15: Press the vertical tile with the + sign. Note the location of the + sign on this icon. It should be at the lower right. See the pointer in the pic below to identify the appropriate icon.
Step 20: Congratulations! You have a screen full of name tags. Save it now to the machine memory or USB stick.
Prepare your embroidery hoop, select your thread(s), and go to the ready-to-embroidery mode and start stitching! If your machine keeps starting/stopping for thread changes or from design to design, let me know and I'll post the page number of the manual for continuous color (multiple colors) or single color option (one color). Or maybe a blog post will be easier . Until then...
Happy Sewing and Embroidery!